Is er al een update naar 2.0 of 2.1?
Ik krijg er sowieso geen binnen via T-Mobile. Kan hij er handmatig opgezet worden?

Alvast bedankt voor de reacties.

Hoezo krijg je er geen één binnen via T-Mobile?
Volgens mij is er nog geen nieuwe, ik zit ook te wachten

djmagich;17702
Hoezo krijg je er geen één binnen via T-Mobile?
Volgens mij is er nog geen nieuwe, ik zit ook te wachten/cdn2.androidworld.nl/b4c9f3af9a/static/djangobb_forum/img/smilies/smile.png" />

Nope nog geen update,

Heb al meerdere keren bij t-mobile geprobeert los te peuteren wanneer er nou eens iets gaat gebeuren maar er komt maar geen reactie

edit: Dit is duidelijk 2.1! Misschien komt hij eraan?
Het ziet er in elk geval zeker flex uit op het onderstaande filmpje, echt een upgrade voor het toch wat goedkoop uitziende UI
http://www.youtube.com/watch?v=7mCYxrzFgHY

Na wat googlen op het volgende tread uitgekomen, tot mijn spijt

sorry, The first Huawei 2.1android release time will delay to the middle days of May, and it also does not support Vidio call.

Da's wel balen…
Hoop dat ie snel komt!

EDIT: Deze post is voor de vorige berichten gedaan, het word dus toch ergens in mei :S

Nieuwe post op het huewai forum:

Thread: Huawei will release Android2.1 before may,2010
Android update is needed ! Huawei will release Android2.1 before may,2010. Then all Huawei android smart phone end users could experience the strong functions of google android os.

Laatste nieuws:

Iemand van Modaco heeft een beta van android 2.1 in zijn bezit. Als hij hem geroot heeft kan hij hem vrijgeven aangezien zijn bron anders de lul is bij Huewai

De ROM heeft standaard geen multitouchLive wallpapers werken wel!

Kan er mij iemand vertellen hoe zo'n upgrade er in de praktijk aan toe gaat. Is dat downloaden en daarna installeren. Of moet je ergens een cd kopen en dan koppelen met je pc en dan bestanden downloaden of hoe werkt het eigenlijk?

Zo gaat het er aan toe!

As many people were asking how to root the Pulse/8220 I'm going to explain that in this tutorial.

First of all please excuse that this tutorial may include some linguistic imperfections but english isn't my native language

Anyway let's start.

What you need:

Hardware:
T-Mobile Pulse or Huawei 8220 phone
USB-cable
PC (Unix/Windows)
Software:
If you're using a stock phone you'll need also:
December Update by T-Mobile: http://www.romraid.com/paul/pulse/DecemberUpdate.zip
Short tutorial how to install the Update:
Unzip the downloaded file to a location of your choice on your computer
Copy the “dload” folder and all its contents to the root directory of your microSD card
Insert the microSD card back into your device
On your device select Settings -> SD card -> Phone Storage -> Upgrade
The upgrade process will give you several warnings which you need to confirm to continue - then press the Upgrade option to begin the update
As the update progresses you will see several screens along with a progress bar
Once complete you will see a confirmation screen, and your Pulse will automatically restart
Continue with next step “If you have already/successfully installed the December Update:”


If you have already/successfully installed the December Update:
Super-boot: http://www.romraid.com/paul/pulse/1.5-pulse-superboot.zip
Recovery-mode-zip: http://www.romraid.com/paul/pulse/1.5.2-pu…nrarecovery.zip
Lastes BoBo Android 2.1 News
If you're using Windows Vista or lower: Install your Pulse-CD
If you're using Windows 7: Install driver News

Step 1: getting root rights

- unpack your downloaded files
- power Pulse off
- boot Pulse into bootloader-mode by pressing “volume-down”+“red-key(hang up call)”+“power on” together
- plug Pulse in using your USB-cable
- open “install-superboot-windows.bat”/“install-recovery-mac.sh”/“install-recovery-linux.sh”(open in terminal) from downloaded 1.5-pulse-superboot.zip on your PC (choose matching version)
- „Writing Superboot (xyz Bytes) - ok“ should appear on your Pulse screen
- you got root rights

Step 2: flashing recovery sector
- open “install-recovery-windows.bat”/“install-recovery-osx.sh”/“install-recovery-linux.sh”(open in terminal) from downloaded 1.5.2-pulse-amonrarecovery.zip (choose matching version)
- „Writing Superboot (xyz Bytes) - ok“ appears again
- You've successfully installed the recovery-mode
- now remove your battery to reboot your phone

Step 3: making a Nand Backup IMPORTANT
- insert your battery
- power Pulse on by pressing “red-key”+“menu”+“power on” together
-
(If this don't appear go back to step 1)
- go to “Backup/Restore” (using joystick)
IF YOU ARE USING THE APP2SD+ Version (rX-2.1-a2SD+-signed.zip)
- open “Nand + ext backup”
IF YOU ARE UNSING THE VERSION WITHOUT APP2SD (rX-2.1-signed.zip)
- open “Nand backup”
- confirm with green-key
- after it's complete go back to previous menu (press home key)
- open “Toggle USB MS”
- open SD-card on your PC
- copy “nandroid” folder to somewhere on your PC
- press green-key again and disable USB

Step 4: formate SD BACKUP DATA FIRST (This is optional and will delete all data stored on SD-card! I recommend it for a proper setup.)

- go to “Partition sdcard”=>“Partition SD”
- set “Swap size” to “0” (press volume-down)
- set ext2 size to 512 mb (depends on how lage you like it. It's the memory you'll install your apps on. Press volume-up/down)
- !!!YOU'LL LOOSE ALL YOUR DATA ON YOUR CARD - MAKE A BACKUP!!! confirm with green-key (
- now your SD is formated

Step 5: wipe data
- go to “Wipe”
- open “Wipe data/factory reset”
- confirm with green
- open “Wipe Darvik Cache”
- confirm with green
- You've wiped everything (nearly ^^) on your phone

Step 6: Flash 2.1 ROM
- toggle USB again
- copy “r4-2.1-pulse-signed.zip” ROM to your SD-card using your PC
- press green-key and hang out your Pulse
- go to “Flash zip from sdcard”
- choose “r4-2.1-pulse-signed.zip”
- press green-key to confirm
- wait till Pulse has successfully installed Android 2.1
- open “Reboot system now”
- Android should welcome you - YOU DID IT

Step 7: Reboot
- your Pulse is now rebooting
- it should show a “T-Mobile” character with a rotating circle
- installation takes round a round 3-5 minutes
IF NOT:

- power Pulse of (remove battery) and power it on with removed SD-card
- start again form step 4

IF IT DOES NOT WORK:
- start Pulse into recovery-mode with “red-key”+“menu”+“power on”
- press “Toggle USB MS”
- copy your Pulse-backup (“nandroid”-folder) to your SD-card
- go to “Backup/Restore”=>“Nand restore”=>“mem=128M”“BCDEMRS-2010xxxx-xxxx”
- confirm with green-key
- reboot your phone
- you are back on your previous configuration (Android 1.5)
- search MoDaCo-forum for help

Noted problems:

1) Lots of android.acore force close notices. This can be improved (but not solved) by using a simpler desktop (eg. Zeam on the market), and possibly installing autokiller to adjust the default process tolerances.
2) The vibrate function doesn't work (only “normal 8220”) / works with 8220-6
3) Occasional random reboots